Filter
Top Products
B – XML Format 2
Status Message
B-2 SN0054614-00 F
S
B.4
Status Message
Before the closing main tag </QLogic>, SANsurfer FC HBA CLI displays any
returning status from the execution of the command line parameters and the error
messages.
When the execution of the command line parameters is successful, the following
status is displayed:
<Status> 0 </Status>
When the execution of the command line parameters fails, the following status is
displayed, followed by an error message that provides additional details:
<Status> 1 </Status>
B.5
Error Message
When the execution of the command line parameters is fails an Error message
appears between the Status and Reboot tags. d the system must be restarted for
the change to take effect, the following message is displayed:
<ErrorMsg> "Details of the failure "</ErrorMsg>
B.6
Reboot Message
When the execution of the command line parameters is successful and the
system must be restarted for the change to take effect, the following message is
displayed:
<Reboot> 1 </Reboot>
When the execution of the command line parameters is successful and the
system does not need to be restarted, the following message is displayed:
<Reboot> 0 </Reboot>
B.7
XML2 Tags for Each Option
The following sections describe the XML Format 2 for each command line option.
In these sections, the term number refers to the adapter number displayed with
the HBA general information (command line option -I).
B.7.1
Display Adapter Settings
(Command Line Option -c)
The command format is: