Filter
Top Products
5 – Non-interactive Commands
Command Summary
5-28 SN0054614-00 F
S
Write buffer failed
Link Failure – Number of link failures
Loss of sync – Number of sync loss errors
Loss of signal – Number of signal loss errors
Invalid CRC – Number of invalid CRCs
5.3.19
-l
(Display LUN Info)
This command shows LUN information for:
All HBAs
A specific target
A specific LUN on a specific target
To show the LUN information for all target devices for a specific
HBA Instance,
type:
# scli -l (<HBA Instance> | <HBA WWPN>)
To show the LUN information for a specific device for a specific HBA port, type:
# scli -l (<HBA Instance> | <HBA WWPN>) (<Target Port ID> |
<Target WWPN>)
To show the LUN information for a specific LUN on a specific target device for a
specific HBA port instance, type:
# scli -l (<HBA Instance> | <HBA WWPN>) (<Target Port ID> |
<Target WWPN>) <LUN ID>
Where:
5.3.20
-ls
(Display Link Status)
To view the link status, type:
# scli -ls (<HBA Instance> | <HBA WWPN>) [(<Parameter Name> |
<Parameter Alias>) <Parameter Value>]
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
Target Port ID = Port ID of the target
Target WWPN = World wide port name of the target
LUN ID = ID of the LUN