Filter
Top Products
5 – Non-interactive Commands
Display System Information (Command Line Options -g, -z, and -tp)
SN0054614-00 F 5-3
A
5.2.3
Host Topology
(Command Line Option -tp)
The command format for Host Topology is:
# scli -tp
When you select this option, the SANsurfer FC HBA CLI tool shows the
information in section 5.2.2, as well as the following additional information:
Interconnect Element (switch or HBA)
Type (Switch or HBA)
World wide name
Domain ID
Management ID
IP address
Model
Symbolic name
Serial number
MAC address
Firmware version
Port count
Beacon status
Interconnect element (HBA):
Type
World wide node name
World wide port name
Vendor ID
HBA Model
HBA Serial Number
HBA Alias
Port Alias
Driver Version
Firmware Version
Total Number of Devices
Host
Number of Port
Beacon status
Port Type
NOTE:
Under Linux, host topology (-tp) is disabled if you are using the ioctl or
sysfs (inbox) driver.