3 – Initial Installation
Uninstalling SANsurfer FC HBA CLI
SN0054614-00 F 3-13
A
3.3.1
Windows Uninstall
To uninstall SANsurfer FC HBA CLI, use either the standard GUI or command line
method:
Standard (GUI) uninstall—See section 3.3.1.1
Command line uninstall—See section 3.3.1.2
3.3.1.1
Standard (GUI) Uninstall
To uninstall SANsurfer FC HBA CLI using the GUI, do the following steps:
1. From the Control Panel, click Add or Remove Programs.
2. Highlight SANsurfer FC HBA CLI.
3. Click Remove. No re-boot is required.
Alternately, invoke scli-1.x.x-xx.windows.exe and select the option to
Remove all installed features.
3.3.1.2
Command Line Uninstall
To uninstall SANsurfer FC HBA CLI using the command line, type the following:
scli-1.x.x-x.windows.exe /uninst /s
If you created an uninstall script in section 3.2.1.2.2, you can uninstall SANsurfer
FC HBA CLI in silent mode by type the following:
scli-1.x.x-x.windows.exe /s /f1”C:\Temp\uninstall.iss"
3.3.2
Linux Uninstall
To uninstall SANsurfer FC HBA CLI, go to the command line and type one of the
following commands, where x.xx.xx is the current version of CLI:
rpm -e scli-x.xx.xx-xx
rpm -e scli
To query for the installed SANsurfer FC HBA CLI package name, type the
following text from the command line:
rpm -q scli
3.3.3
Solaris Uninstall
To uninstall SANsurfer FC HBA CLI, follow one of these procedures: