Q-Logic FC HBA CLI Network Card User Manual


 
4 – Interactive Commands
General Information Menu (Command Line Option -g)
4-4 SN0054614-00 F
S
This option shows you the HBA Host Topology menu.
From the General Information Menu, type the number for Host Topology, and
then press ENTER. When you select this option, the following options appear:
Display
Save As Txt file
Save As XML File
4.1.2.1
Display (Host Topology)
(Command Line Option -tp | -topology)
1: General Information2: Host Topology1: Display
The host topology option shows information about interconnect elements
(switches or HBAs) and switch ports.
If the interconnect element is a switch:
Interconnect Element (switch)
Type (Switch or HBA)
World wide name
Domain ID
Management ID
IP address
Model
Symbolic name
Serial number
MAC address
Firmware version
Port count
Beacon status
If the interconnect element is an HBA:
NOTE:
Under Linux, host topology (-tp) is disabled if you are using the ioctl or
sysfs (inbox) driver.
NOTE:
Attached Port means a QLogic HBA, a tape or disk target device, or GBIC
connected to a physical port on a switch.