Filter
Top Products
4 – Interactive Commands
Target Link Speed or iiDMA Settings Menu (Command Line Option -q)
4-42 SN0054614-00 F
S
iiDMA Menu
HBA Instance 3 (QLA2462 Port 2) : Online
WWPN: 21-01-00-E0-8B-A5-8C-7C
Desc: QLA2462 PCI-X 2.0 to 4Gb FC Dual Channel
1: Disk
Vendor : SEAGATE
Product ID : ST136403FC
Product Rev : FF5F
Serial Number : LT06464600001011HGGH
Port Name : 21-00-00-20-37-1A-6B-CF
Port ID : 11-01-E4
Intelligent Interleave Factor: 4 Gbps
2: Disk
Vendor : SEAGATE
Product ID : ST118273 CLAR18
Product Rev : SG1D
Serial Number : LP60266900001919HQ1K
Port Name : 21-00-00-20-37-11-FF-EF
Port ID : 11-01-E8
Intelligent Interleave Factor: 4 Gbps
3: Apply Changes to selected Target(s)
4: Return to Previous Menu
Note: 0 to return to Main Menu
Enter Selection:
4.5.3.1
Advanced Configuration
5: Target Link Speed n: Port Number 2: Advanced Configuration
When you select a Port Instance from the Target Link Menu, the Target Link
Speed Menu (Advanced) appears. It includes the link speed options. The options
vary according to the HBA in use. For example:
1 Gbps
2 Gbps
4Gbps
8 Gbps
Type the number for the link speed you want for the HBA Port Instance selected
and then press ENTER.
The same menu reappears, allowing you to set the link speed for every port
instance you want.