Filter
Top Products
D – Non-interactive Error Codes
SN0054614-00 F D-3
A
41 ERROR_DIAGNOSTICS_LOOP_DOWN Unable to run diagnostics because the
loop is down
42 ERROR_DIAGNOSTICS_FAILURE Diagnostics test failed with errors
43 ERROR_DIAGNOSTICS_DATA_MISCOMPARE Diagnostics test failed with data mis-
compare
44 ERROR_DIAGNOSTICS_UNKNOWN_STATUS Unknown diagnostic test status
45 ERROR_DIAGNOSTICS_NO_AVAIL_TARGET Unable to run R/W buffer test because
there are no attached devices
46 ERROR_DIAGNOSTICS_NOT_FOUND_TARGET Unable to run R/W buffer test because
the excluded device is not available
47 ERROR_DIAGNOSTICS_MAX_FRAME_SETTING Unable to run diagnostics because of
the HBA current frame size setting
48 ERROR_INVALID_DIAGNOSTICS_SETTINGS Invalid diagnostics test parameter set-
tings
49 Reserved Not used
50 ERROR_FC_LINK_UNKNOWN_STATUS Error getting FC link status
51 ERROR_RESET_LINK_STATUS Unable to reset HBA link status
52 ERROR_INVALIDE_STATISTICS_PARAMS Invalid link status/statistics parameter
settings
53 Reserved Not used
54 Reserved Not used
55 Reserved Not used
56 Reserved Not used
57 Reserved Not used
58 Reserved Not used
59 Reserved Not used
60 ERROR_INVALID_PARAM_SETTINGS Invalid HBA parameter value/key
61 ERROR_PARAM_UNSUPPORTED_HBA Specified HBA parameter is not sup-
ported
62 ERROR_PARAM_UNSUPPORTED_DRIVER Unable to update HBA parameters –
Driver unsupported
Table D-1. Error Code Descriptions – Non-interactive Mode (Continued)
Code Name Description