5 – Non-interactive Commands
Command Summary
5-36 SN0054614-00 F
S
Where:
5.3.25
-pa
(Define Port Alias)
With this command you can:
Define the port alias for a specific HBA port (1)
Delete the port alias from a specific HBA port (2)
View the port alias for a specific HBA port (3)
To define a port alias for the specified HBA, type:
# scli -pa (<HBA Instance> | <HBA WWPN>) <alias>
Where:
To delete a port alias for the specified HBA port, type:
# scli -pa (<HBA Instance> | <HBA WWPN>) delete
To view a port alias for the specified HBA port, type:
# scli -pa (<HBA Instance> | <HBA WWPN>) view | ?
5.3.26
-q
(View or Set Target Link Speed)
Type the following command to view the link speed of all Targets attached to one
HBA or all HBA’s:
# scli -q (<HBA Instance> | <HBA WWPN> | <all>) [-targets | -t ]
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
Alias = Symbolic name you assign to the HBA port
NOTE:
The -q option is supported only on 4GB HBAs.