Filter
Top Products
B – XML Format 2
Display System Information (Command Line Option -g)
B-20 SN0054614-00 F
S
B.8.9
Link Statistics
(Command Line Option -ls)
The command format is:
scli -ls (<HBA Instance> | <HBA WWPN>) [(<Parameter Name> |
<Parameter Alias>) <Parameter Value>] -x2
The XML Format 2 for the link statistics option is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<LinkStatus PortName="value"
LinkFailure="value"
SyncLoss="value"
SignalLoss="value"
InvalidCRC="value"
TimeStamp="value"/>
</HBA>
<Status> n </Status>
<Reboot> n /Reboot>
</QLogic>
The <HBA>…</HBA> sequence repeats for each HBA.
NOTES:
The <HBA>…</HBA> sequence repeats for each HBA.
The <DriverSettings…/> sequence repeats for each HBA.
The <VPD Product Identifier…/> sequence repeats for each
HBA.
The <Target>…</Target> sequence repeats for each target.
The <LUN… /> sequence repeats for each LUN.
The <EnabledLUN ID.… /> sequence repeats for each enabled LUN.
The <TargetBinding…/> sequence repeats for each target persistent
binding entry.
The <BootDevice…/> sequence repeats for each boot device selection
entry.