Filter
Top Products
5 – Non-interactive Commands
Command Summary
5-14 SN0054614-00 F
S
The following restrictions apply:
Under Solaris, the driver configuration feature is disabled if you are using the
driver from the OS installation CDs (QLC driver).
Under Linux, this feature is disabled if you are using the ioctl or sysfs (inbox)
driver.
Under Macintosh, the BindWWPN and BindPortID parameters are not
changeable; Mac supports only the BindWWPN parameter.
5.3.11
-g
(Display System Information)
To view system information, type:
# scli -g
For details of this command, see section 5.2.
5.3.12
-gs
(Show HBA Statistics)
To view the HBA statistics, type:
# scli -gs (<HBA Instance> | <HBA WWPN>) [(<Parameter Name> |
<Parameter Alias>) <Parameter Value>]
Present persistently bound tar-
get(s) plus any new target(s) with
driver default
PersistentPlusNew PN 0, 1
Present targets with driver default
NewOnly
b
NO 0, 1
Bind devices by WWPN BindWWPN BW 0, 1
Bind devices by port ID BindPortID BP 0, 1
Table Notes
a
0 = Disabled, 1 = Enabled
b
Driver parameter NewOnly (NO) is supported only with the failover driver. If you select a QLA22xx HBA, all
QLA22xx HBAs on the host will use the same settings. If you select a 23xx HBA, all 2G/4G HBAs on the host will
also use the same settings.
Table 5-3. Driver Settings Parameters (Continued)
Description
Parameter Name
<param name>
Alias
<param
alias>
Value
a
<param
value>