4 – Interactive Commands
Target Persistent Bindings Menu (Command Line Option -p)
SN0054614-00 F 4-45
A
When you select an HBA to set its link speed, the Target Link Speed Menu
(Advanced) menu for a particular HBA instance appears. It shows the link speed
options you can choose from. The options vary according to the HBA in use. For
example:
1 Gbps
2 Gbps
4Gbps
8 Gbps
When you set a Link Speed option for a particular (target) device the Target Link
Speed Menu (Advanced) for All HBAs reappears, allowing you to set the link
speed for another HBA Instance.
When you have set the link speed for all the instances you want to, type the
number for Apply changes to Selected Target(s) and press ENTER.
The system returns a message indicating the changes have been saved. For
example:
New iiDMA setting has been saved to seleted target(s) on HBA
instance 0.
4.5.4.3
iiDMA Settings – Disk
5: iiDMA Settings 1 - n: HBA Port n n: Disk n
When you select a specific disk on the HBA port, the following options are
available on the iiDMA Menu (Advanced):
1 Gps
2 Gps
4 Gps
4.5.5
iiDMA – All HBAs
5: iiDMA Settings n: All HBAs
When you select All HBAs to configure, the options for Basic Configuration and
Advance Configuration appear on the menu. See 4.5.1 Configuring the iiDMA
Settings.
4.6
Target Persistent Bindings Menu
(Command Line Option -p)
6: Target Persistent Bindings