Filter
Top Products
5 – Non-interactive Commands
Command Summary
5-8 SN0054614-00 F
S
To save the BIOS/FCode to a file, type:
# scli -b (<HBA Instance> | <HBA WWPN>) SAVE <BIOS/FCode File Name>
Where:
5.3.3
-c
(Show Parameter Settings)
Use the -c command to show the parameter settings for all HBAs in the system:
# scli -c [ <all> ]
To show the parameter settings for a specific HBA, type:
# scli -c (<HBA Instance> | <HBA WWPN>)
Where:
5.3.4
-d
(Update Device Driver)
Use the -d command to update the HBA’s device driver:
scli -d <File Name>
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name
-rg =
Flash region update mode (4GB HBAs only
a
):
fw =
boot =
all =
Update firmware only
Update bootcode only (BIOS/FCode/EFI image)
Update all regions (BIOS/FCode/EFI) depending on
the Flash image.
BIOS/FCode File
Name
= Name or path of file continuing update BIOS/FCode
a
Region update only supported on QLA/QLE/QMC246x HBAs.
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
BIOS/FCode File
Name
= File name or a path to a file in which to save BIOS/FCode
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA