Filter
Top Products
2 – Getting Started
Starting Non-interactive Mode
SN0054614-00 F PRELIMINARY 2-3
A
2.3
Starting Non-interactive Mode
To start SANsurfer FC HBA CLI in non-interactive mode, type the following in a
command window:
scli <Parameters>
SANsurfer FC HBA CLI executes the command options, then terminates.
To list all of the available command line parameters and the SANsurfer FC HBA
CLI version, type the following:
scli -h
– Or –
scli -?
In Solaris SPARC, include double quotes around the view option (?) if the system
is running with a csh or tsch shell. For example:
# scli -e 0 "?"
For world wide node name (WWNN), world wide port name (WWPN), and port ID
parameter inputs, SANsurfer FC HBA CLI accepts the notation with and without
the dash (–). Hexadecimal values can be uppercase or lowercase.
The following input formats are valid for the WWNN and WWPN:
20-00-00-E0-8B-01-83-C4 200000E08B0183C4
The following inputs are valid for the port ID:
68-5C-AB 685CAB
All command line options must be preceded by the dash (–) or forward slash (/)
notation. Most options have a corresponding menu selection in interactive mode.
The valid command line options are listed in Table 2-1.