Q-Logic FC HBA CLI Network Card User Manual


 
E – Help Commands
E-6 SN0054614-00 F
S
–p ( <hba instance> | <hba wwpn> )
{ <target wwnn> <target wwpn>
<target portid> <target id> }
Binds the selected device(s) attached to an
HBA port.
–p ( <hba instance> | <hba wwpn> )
remove <target wwnn> | unbind
<target wwnn>
Unbinds a specific device attached to an HBA
port.
–p ( <hba instance> | <hba wwpn> |
<all> ) ( view | ? )
Displays the current persistent binding config-
uration on an HBA port or all HBAs.
–p ( <hba instance> | <hba wwpn> |
<all> ) bind all
Binds all device(s) attached to an HBA port or
all HBAs.
–p ( <hba instance> | <hba wwpn> |
<all> ) remove all | unbind all
Unbinds all device(s) attached to an HBA port
or all HBAs.
–pa ( <hba instance> | <hba wwpn> )
<alias>
Sets an alias to an HBA port.
–pa ( <hba instance> | <hba wwpn> )
delete
Deletes the current alias of an HBA port.
–pa ( <hba instance> | <hba wwpn> )
view | ?
Displays the current alias of an HBA port.
–q ( <hba instance> | <hba wwpn> )
{ <target wwpn> <speed> }
Modifies the iiDMA settings of selected tar-
get(s) on an HBA port. This feature is sup-
ported only on 4Gb or latest HBAs.
–q ( <hba instance> | <hba wwpn> )
<target wwpn>
Displays the current iiDMA settings of a spe-
cific target on an HBA port.
–q ( <hba instance> | <hba wwpn> |
<all> ) ( –targets | –t )
<speed>
Modifies the iiDMA settings of all targets on an
HBA port or all HBAs.
–q ( <hba instance> | <hba wwpn> |
<all> ) [ –targets | –t ]
Displays the current iiDMA settings of all tar-
gets on an HBA port or all HBAs.
–r ( <hba instance> | <hba wwpn> )
save <file name>
Saves the current HBA parameters of an HBA
port to a file.
–r ( <hba instance> | <hba wwpn> |
<all> ) <file name>
Updates the HBA parameters of an HBA port
or all HBAs from a file.
Table E-1. Help Commands (Continued)
Command
Line
Action
Arguments Function