Q-Logic FC HBA CLI Network Card User Manual


 
4 – Interactive Commands
Target/LUN List Menu (Command Line Options -t and -l)
SN0054614-00 F 4-37
A
4.4.2.5
All LUN(s)
4: Target/LUN List n: Port Number 3: All LUN(s)
When you select this option, SANsurfer FC HBA CLI shows the following
information about all LUNs for all HBA Port Instances:
Product Vendor
Product ID
Product Revision
LUN
Size (in GB or MB)
Type (for example, magnetic disk)
WWULN (world-wide unique LUN name)
OS LUN Name (on Solaris and Linux)
Here is an example of the All LUNs information:
-------------------------------------------------------------
HBA Instance 0: QLA2462 Port 1 WWPN 21-00-00-E0-8B-1F-9D-F0 Port
ID 02-00-00
-------------------------------------------------------------
Target WWPN (22-00-00-04-CF-9C-24-CA)
-------------------------------------------------------------
Product Vendor : SEAGATE
Product ID : ST318203FC
Product Revision : 0006
LUN : 0
Size : 34.18 GB
Type : SBC-2 Direct access block device
(e.g., magnetic disk)
WWULN : 20-00-00-20-37-38-73-BC
Press <Enter> to continue:
Target information repeats for each target.
Here is an example of the All LUNs information for Linux:
Product Vendor : HITACHI
Product ID : HUS103073FLF210
Product Revision : FA16
NOTE:
In the Solaris OS, the QLA HBA driver supports a maximum of 256
LUNs.
In the Solaris OS, the QLC HBA driver supports a maximum of 16K
LUNs.