Filter
Top Products
SANsurfer FC HBA CLI User’s Guide
Command Line Interface for QLogic Fibre Channel Host Bus Adapters
SN0054614-00 F Page v
A
Expanded Save/Update Flash section to list which
OSs and HBAs save/update flash, BIOS, or the
option ROM image.
Section 4.10
Added description and preparation instructions for
loopback and read/write buffer tests. Added
description of these test results.
Section 4.12.1.1, Section 4.12.2
The following options and commands were added in Rev. E:
Host Topology (command line option -tp) Section 4.1.2, Section 5.3.31
HBA Alias (command line option -ha) Section 4.2.1.2, Section 5.3.14
HBA Port Alias (command line option -pa) Section 4.2.1.3, Section 5.3.25
SFF DMI (command line option -dm) Section 4.12, Section 5.3.5
The following options and commands were changed in Rev. E:
Host Information (command line option -g):
removed QLogic direct driver version from the list
of displayed information.
Section 4.2.1
For Host Configuration (command line option -z),
made the following changes to the list of displayed
information:
Added VPD information to display HBA information
(command line option -I).
Added view driver settings (command line option
-fg).
Removed run loopback test (command line option
-kl).
Removed run read/write test (command line option
-kr).
Removed display and change HBA statistics (com-
mand line option -gs).
Removed display and change link status (com-
mand line option -ls).
Also changed the list order to reflect the order in
which the commands are displayed.
Section 4.2
Show HBA Information (command line option -i):
Added HBA Alias and Port Alias to list of shown
information.
Changed PCI bus number to PCI device number.
Section 4.2, Section 4.3.1
Show Device List (command line option -t): added
Serial Number to the list of displayed information.
4.5, 4.4.1