Q-Logic FC HBA CLI Network Card User Manual


 
C – Interactive Exit Codes
SN0054614-00 F C-11
A
231 ERROR_SAVE_TARGET_IIDMA_SETTINGS Failed to set target link speed
232 ERROR_SET_TARGET_IIDMA_
UNSUPPORTED
Target link speed option is not supported with
current HBA
233 ERROR_INVALID_IIDMA_SETTINGS Selected target link speed rate not supported
with current HBA
234 Reserved Not used
235 Reserved Not used
236 Reserved Not used
237 Reserved Not used
238 Reserved Not used
239 Reserved Not used
240 ERROR_NO_TARGET_SELECTED Unable to run target beacon because no
device is selected
241 ERROR_GET_BEACON_STATE Unable to get the beacon status
242 ERROR_SET_BEACON_STATE Unable to set the beacon status
243 ERROR_BEACON_UNSUPPORTED Beacon operation is unsupported
244 ERROR_INVALID_BEACON_PARAMETERS Beacon settings is invalid
245 Reserved Not used
246 Reserved Not used
247 Reserved Not used
248 Reserved Not used
249 Reserved Not used
250 ERROR_GET_HBA_ALIAS Failed to retrieve HBA alias of the HBA
251 ERROR_UPDATE_HBA_ALIAS Failed to update HBA alias of the HBA
252 ERROR_GET_PORT_ALIAS Failed to retried port alias of the HBA
253 ERROR_UPDATE_PORT_ALIAS Failed to update port alias of the HBA
254 Reserved Not used
255 Reserved Not used
Table C-1. Exit Code Descriptions – Interactive Mode (Continued)
Return
Code
Name Description