5 – Non-interactive Commands
Command Summary
5-32 SN0054614-00 F
S
Table 5-11 lists the HBA parameter names and aliases.
.
Table 5-11. HBA Parameters
Description Name Alias Value
Connection options ConnectionOption CO
See table note, below
a
a
Connection Options:
0 – Loop only
1 – Point-to-point only
2 – Loop preferred, otherwise point-to-point
3 – Point-to-point preferred, otherwise loop (QLA22xx HBAs only)
Data rate DataRate DR
See table note, below
b
Enable BIOS
EnableBIOS
c
EB 1=Enable, 0=Disable
Enable extended logging EnableExtendedLog-
ging
d
EL 1=Enable, 0=Disable
Enable FC tape EnableFCTape EF 1=Enable, 0=Disable
Enable hard loop ID EnableHardLoopID HL 1=Enable, 0=Disable
Enable LIP full login EnableLIPFullLogin FL 1=Enable, 0=Disable
Enable LIP reset EnableLipReset LP 1=Enable, 0=Disable
Enable target reset EnableTargetReset TR 1=Enable, 0=Disable
Execution throttle ExecutionThrottle ET 1–65535
Frame size FrameSize FR 512, 1024, 2048
Hard loop ID HardLoopID HD 0–125
Interrupt delay timer InterruptDelay-
Timer
ID 0–255
Login retry count LoginRetryCount LR 0–255
Link down timeout LinkDownTimeOut LT 0–240
Maximum LUNs per tar-
get
MaximumLUNsPerTar-
get
ML 0, 8, 16, 32, 64, 128,
256
Operation mode OperationMode OM
See table note, below
e
Port down retry count PortDownRetryCount PD 0–255
Reset Delay ResetDelay RD 0-255
Table Notes: