Filter
Top Products
4 – Interactive Commands
Target Link Speed or iiDMA Settings Menu (Command Line Option -q)
4-40 SN0054614-00 F
S
4. To use Basic Configuration:
a. Select the HBA.
b. Select the intelligent interleave factor from the intelligent interleave
factor speed list (1 Gbps, 2 Gbps, 4 Gbps, or 8 Gbps) to all attached
devices.
c. Choose one of the following options:
To apply the new settings to all attached devices, select Yes. The
following is returned:
iiDMA settings have been saved to selected target(s)
on HBA instance n.
To exit iiDMA Settings without making any changes, select No.
5. To use Advanced Configuration:
a. Select the HBA.
b. From the device list, select a device (disk) that is currently attached to
this HBA.
c. From the intelligent interleave factor speed list, select the intelligent
interleave factor (1 Gbps, 2 Gbps, 4 Gbps, or 8 Gbps) that you want
to set for this device.
d. Repeat the previous step for additional devices.
e. Choose one of the following options:
To proceed, select Select the Apply changes to selected
target(s). The following is returned:
The iiDMA settings have been saved to selected
target(s).
To exit without making any changes, select Return to Previous
Menu.
4.5.2
HBA Port Instance
5: Target Link Speed Target Link Speed Menu for HBA instance 1-n
This option shows the Target Link Speed Menu or iiDMA Settings Menu for a
specific Port Instance.This menu looks like the Target List Menu shown in section
4.4.1.1. It includes a list of all targets attached to the selected port instance and
specific information about each target, including:
Target Type (for example, Disk)
Product Vendor
Product ID