SN0054614-00 F D-1
Appendix D
Non-interactive Error Codes
To list the SANsurfer FC HBA CLI non-interactive error codes from the command
line, type:
scli -ei
(To see the interactive exit codes, see Appendix C.)
Table D-1. Error Code Descriptions – Non-interactive Mode
Code Name Description
0 SUCCESS Command executed with no error
1 ERROR_OPEN_FlLE Failed to open file
2 ERROR_READ_FILE Failed to read file
3 ERROR_WRITE_FILE Failed to write to a file
4 ERROR_CLOSE_FILE Failed to close a file
5 ERROR_INCORRECT_FILE Selected file is incorrect
6 ERROR_INCORRECT_FILE_SIZE File size is incorrect
7 ERROR_UNSUPPORTED_HBA HBA is unsupported
8 ERROR_NO_HBA Unable to open the HBA handle
9 ERROR_UNKNOWN_HBA HBA is unknown to SANsurfer FC
HBA CLI
10 ERROR_INVALID_SSID HBA has invalid SSDID/SSVID
11 ERROR_MISMATCH_SSID The specified flash/NVRAM file does
not have the SSDID/SSVID that match
HBA
12 ERROR_MISMATCH_CHECKSUM File checksum does not match
13 ERROR_CORRUPTED_FILE File appears to be corrupted
14 ERROR_FILE_CHKSUM_ERROR File checksum returns error
15 ERROR_FILE_INVALID_DATA File has invalid data
16 ERROR_FLASH_UPDATE_IGNORE HBA does not need to be updated
17 Reserved Not used