4 – Interactive Commands
Target/LUN List Menu (Command Line Options -t and -l)
SN0054614-00 F 4-35
A
Status
Here is an example of the Target information:
Path : 0
Target : 3
Device ID : 0x87
Product Vendor : SEAGATE
Product ID : ST336607FC
Product Revision : 0006
Serial Number : 3JA9TN7600007517T6P1
Node Name : 20-00-00-11-C6-2D-5B-F9
Port Name : 22-00-00-11-C6-2D-5B-F9
Port ID : 02-0A-DC
Product Type : Disk
LUN Count(s) : 1
Status : Online
4.4.2.3
All Targets
4: Target/LUN List n: Port Number 1: Individual LUNs
When you select this option, SANsurfer FC HBA CLI shows the LUN List Menu
containing:
Product Vendor
Product ID
Port Name
Port ID
LUN ID
OS LUN Name (on Solaris and Linux)
Here is an example of the LUN information:
Product Vendor : SEAGATE
Product ID : ST336607FC
Product Revision : 0006
LUN : 0
Size : 34.18 GB
Type : SBC-2 Direct access block device
(e.g., magnetic disk)
NOTE:
In the Solaris OS, the QLA HBA driver supports a maximum of 256
LUNs.
In the Solaris OS, the QLC HBA driver supports a maximum of 16K
LUNs.