Filter
Top Products
4 – Interactive Commands
HBA Parameters Menu
SN0054614-00 F 4-27
A
4.3.1.2.9
Operation Mode
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Operation Mode
This option shows the Operation Mode Menu. From it you can select:
Interrupt for every I/O Completion
Interrupt when Interrupt DelayTimer expires
Interrupt when Interrupt Delay Timer expires or no active I/O
Type the number for the Operation Mode you want and press ENTER.
4.3.1.2.10
Interrupt Delay Timer
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Interrupt Delay Timer
This choice gives you the option to set the Interrupt Delay timer to 0 to 255
seconds.
You cannot set the Interrupt Delay timer when the Operation Mode (blue) is set to
Interrupt for Every I/O Completion.
4.3.1.2.11
Execution Throttle
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Execution throttle_
This choice gives you the option to set the Execution Throttle to a value from1 to
65535.
4.3.1.2.12
Login Retry Count
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Login Retry Count
This choice gives you the option to set the Login Retry Count to a value from 0 to
255.
4.3.1.2.13
Enable LIP Reset
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Enable LIP Reset
This choice gives you the option to Enable or Disable LIP Reset.
4.3.1.2.14
Port Down Retry Count
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Port Down Retry Count