Q-Logic FC HBA CLI Network Card User Manual


 
1 – Introduction
Guide Overview
SN0054614-00 F PRELIMINARY 1-3
A
# scli -z
Text in ALL CAPITALS usually indicates the name of a key that you press on
the keyboard. For example:
Type the number for Host Information and then press ENTER.
Italicized text indicates either a document reference, glossary term, or
emphasis. For example:
Attached Port means a QLogic HBA....
For a complete list, see the QLogic SAN Interoperability Guide.
Italicized text within angle brackets indicates user-defined variables. For
example:
# scli -k (<HBA Instance> | <HBA WWPN>)
Text shown in blue indicates a cross-reference hyperlink to a Web site or to
another section of this guide. Click the hyperlink to jump to that site or
section. For example:
Visit the QLogic support Web site at support.qlogic.com
for the latest
firmware and product updates.
For information on Vital Product Data (VPD), see section 4.2.1.4.
In Section 4 Interactive Commands, a “breadcrumbs” line follows most
command headings to show you how to access that option; that is, it shows
the hierarchical path from the top level to the command under discussion.
For example, to reach the Save to Text File options from the main
SANsurfer FC HBA CLI menu, you would select option 1 to open the
General Information menu, 2 to open the Host Topology menu, and 2
again to see the Save to Text File options. The following shows a
breadcrumbs example:
1: General Information 2: Host Topology 2: Save to Text File