Q-Logic FC HBA CLI Network Card User Manual


 
SN0054614-00 F C-1
Appendix C
Interactive Exit Codes
To list the exit codes while running SANsurfer FC HBA CLI in interactive mode:
1. From the Main Menu, select the Help option and then press ENTER.
2. On the Help Menu, select Exit Codes and then press ENTER.
The CLI lists the exit code numbers, names, and descriptions as shown in
Table C-1. (To see non-interactive error codes, see Appendix D.)
NOTE:
Exit codes are continually being updated. Although Table C-1 was accurate
at the time this document was written, you should check for the latest exit
codes in the file, Fcscli-exicodes.txt, located in the SANsurfer FC
HBA CLI installation directory.
Table C-1. Exit Code Descriptions – Interactive Mode
Return
Code
Name Description
0 SUCCESS Command executed with no error
1 ERROR_OPEN_FILE Failed to open file
2 ERROR_READ_FILE Failed to read file
3 ERROR_WRITE_FILE Failed to write to a file
4 ERROR_CLOSE_FILE Failed to close a file
5 ERROR_INCORRECT_FILE Selected file is incorrect
6 ERROR_INCORRECT_FILE_SIZE File size is incorrect
7 ERROR_UNSUPPORTED_HBA HBA is unsupported
8 ERROR_NO_HBA Unable to open the HBA handle
9 ERROR_UNKNOWN_HBA HBA is unknown to SANsurfer FC HBA CLI
10 ERROR_INVALID_SSID HBA has invalid SSDID/SSVID
11 ERROR_MISMATCH_SSID The specified flash/NVRAM file does not
have the SSDID/SSVID that match with the
HBA