Filter
Top Products
5 – Non-interactive Commands
Display System Information (Command Line Options -g, -z, and -tp)
5-2 SN0054614-00 F
S
5.2.2
Host Configuration
(Command Line Option -z)
The command line option -z shows all of the HBA’s information in a single
command. The command format is:
# scli -z
The SANsurfer FC HBA CLI tool shows the information in section 5.2.1, as well as
the following additional information:
HBA General information
HBA Vital Product Data (VPD)
HBA Parameter Settings
Driver Settings Information:
Group: Persistent
Group: Binding
Devices/LUNs Information
Selective LUNs Information
Boot Device Settings
To show the information for a single HBA, type the following command:
# scli -z (<HBA Instance> | <HBA WWPN>)
Where:
To show the information for all HBAs, type:
# scli -z all
NOTE:
The failover and SAN device management APIs are QLogic-specific libraries
required for SANsurfer FC HBA CLI. The versions of these libraries are
useful for debugging purposes.
HBA Instance
= HBA number (use -g command to find)
HBA WWPN
= World wide port name of the HBA