Q-Logic FC HBA CLI Network Card User Manual


 
4 – Interactive Commands
Diagnostics Menu (Command Line Options -kl, -kr, and -dm)
SN0054614-00 F 4-73
A
Temperature Voltage Tx Bias Tx Power Rx Power
(C) (V) (mA) (mW) (mW)
-------------- ------- ------- -------- --------
Value 34.17 3.33 5.86 0.498 1.174
Status Normal Normal Normal Normal Normal
High Alarm 95.00 3.63 9.00 0.676 4.000
High Warning 85.00 3.56 8.50 0.646 2.832
Low Warning -5.00 3.04 2.00 0.186 0.200
Low Alarm -10.00 2.97 2.00 0.100 0.100
4.12.3.2
Transceiver Details – Details
Select the Details option on the Transceiver Details menu to view detailed
information for the selected HBA port. The following shows an example:
------------------------------------------------------------------------------
HBA Instance 4: QLE2562 Port 2 WWPN 21-01-00-1B-32-36-18-EE PortID 01-0F-00
------------------------------------------------------------------------------
Optical Transceiver Digital Diagnostic Data:
Address A0
Identifier: SFP
Ext. Identifier: GBIC/SFP defined by serial ID only
Connector: LC
Transceiver Data
Compliance: 0x00 0x00 0x00 0x00
FC Link Length: Intermediate Distance (I)
FC Transmitter Tech: Shortwave Laser w/o OFC (SN)
FC Transmission Media: Multi-mode 50m (M5), Multi-mode 62.5m (M6)
FC Speed: 200 MBytes/Sec, 400 MBytes/Sec, 800 MBytes/Sec
Encoding: 8B10B
BR, Nominal: 0x55
Length (9um) - km: 0x00
Length (9um): 0x00
Length (50um): 0x05
Length (62.5um): 0x02
Length (Copper): 0x00
Vendor name: Intel Corp.
Vendor OUI: 0x00 0x02 0xb3
Vendor PN: TXN31118D100000
Vendor Rev:
Wave Length: 0x0352
CC_BASE: 0xc1
Options:-Signal Loss, as defined in SFP MSA: 0x1
-Signal Loss, inverted from SFP MSA: 0x0
-TX_FAULT signal implemented: 0x1
-TX_DISABLE implemented & disables serial o/p: 0x1
-RATE_SELECT implemented: 0x1