Filter
Top Products
5 – Non-interactive Commands
Command Summary
SN0054614-00 F 5-13
A
5.3.9
-fg
(Show Driver Settings)
To show the driver settings, type:
# scli -fg (<HBA Instance> | <HBA WWPN>) (view | ?)
Where:
5.3.10
-fs
(Configure Driver Settings)
Type the following command to configure the driver settings:
# scli -fs (<HBA Instance> | <HBA WWPN>) {(<Parameter Name> |
<Parameter Alias>) <Param Value>}
Where:
The pairs <Parameter Name> <Parameter Value> and <Parameter Alias>
<Parameter Value> can be repeated to set multiple parameters in a single
command.
Table 5-3 lists the driver configuration parameter names and aliases.
NOTE:
The -fg option is valid only in non-interactive mode.
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
HBA Instance = HBA instance number of an HBA port (use -g com-
mand to find)
HBA WWPN = World wide port name of the HBA
Parameter Name = Name of the parameters
Parameter Alias = Alias of the parameters
Parameter Value = New value of the parameters
Table 5-3. Driver Settings Parameters
Description
Parameter Name
<param name>
Alias
<param
alias>
Value
a
<param
value>
Persistently bound target(s) only PersistentOnly PO 0, 1