Filter
Top Products
4 – Interactive Commands
Diagnostics Menu (Command Line Options -kl, -kr, and -dm)
4-66 SN0054614-00 F
S
After completing the loopback test, do the following steps to prepare for normal
HBA operations:
1. Remove the loopback connector from the HBA connector.
2. Reconnect the cable that you disconnected before installing the loopback
connector.
3. From the Connections Options menu (interactive mode) or the -N
command (non-interactive mode), change the setting back to its previous
setting.
4.12.1.2
Run Loopback Test
When you select Start Diagnostics Test for the loopback test, the following is
returned (example):
------------------------------------------------------------------------------
HBA Instance 4: QLE2562 Port 2 WWPN 21-01-00-1B-32-36-18-EE PortID 01-0F-00
------------------------------------------------------------------------------
------------------
Test Configuration
------------------
Data Pattern : Random
Data Size (Bytes) : 512
Number of test(s)(1-65535) : 65535
Test Increment(1-65535) : 1
On Error : Ignore
Test Continuous : OFF
------------------------------------------------------------------------
----------------------------------
Diagnostics - Loopback Test Result
----------------------------------
Hit <RETURN> to abort
---------------------------------------------
HBA Test Data Pattern Status CRC Disparity FrameLength
--- ----------------------- ----------- --------- --------- -----------
4 BB-54-01-BD-AC-24-DD-80 Success 0 0 0 |
Finished 6376 iterations in 1 second(s)...
4.12.2
Diagnostics Read/Write Buffer Test
12: Diagnostics n: Port Number 2: Read/Write Buffer Test
When you select this option, SANsurfer FC HBA CLI shows the Read/Write
Buffer Test Menu containing the following options: