Q-Logic FC HBA CLI Network Card User Manual


 
5 – Non-interactive Commands
Command Summary
SN0054614-00 F 5-33
A
5.3.23
-o
(Output to a File)
To output result and status messages into a file, type -o, followed by the file
name. For example, to save LUN information to a file named systemLUNinfo:
# scli -l -o systemLUNinfo
Where the file name is systemLUNinfo, all messages are located in the directory
indicated for the system platform:
b
Data Rate (QLA23xx/QLA24xx/QLE23xx/QLE24xx HBAs):
0 – 1 Gbs
1 – 2Gbs
2 – Auto
3 – 4 Gbs
c
EnableBIOS option not available on 4Gb HBA.
d
EnableExtendedLogging option not available on PPC64 or SPARC.
e
Operation mode (QLA/QLE23xx and QLA/QLE24xx HBAs):
0 = interrupt for every I/O completion
5 = interrupt when interrupt delay timer expires
6=interrupt when interrupt delay timer expires or no active I/O
NOTE:
See the HBA Manager Index Adapter setting for QLA200/210 parameters.
NOTES:
The -o option is valid only in non-interactive mode.
This option can be used with all non-interactive mode options that have
a corresponding interactive mode option (see Table 5-1). The option
must be the first or last command in the command line.
If the file already exists, new data are appended to the current file.
Windows:
syslog.log in the current directory
Linux:
/var/log/messages
Macintosh:
/var/log/system.log
Solaris:
/var/adm/messages