SN0054614-00 F 5-1
Section 5
Non-interactive Commands
5.1
Introduction
This section contains the information in the help (to view help, enter the command
-h), plus additional explanation and examples. Each command line option is
listed, followed by a command description and examples of the command in use
and typical responses from the system.
5.2
Display System Information
(Command Line Options -g, -z, and -tp)
When you enter one of these options, general information appears in various
formats. For example:
# scli -g shows Host Information (see section 5.2.1).
# scli -z shows Host Configuration (see section 5.2.2).
#
scli -tp shows Host Topology (see section 5.2.3).
5.2.1
Host Information
(Command Line Option -g)
The command format to show host information is:
# scli -g
When you enter this option, the following information about the local machine
appears:
Host Name
OS type
OS version (patches where applicable)
SAN target management (SDM) API version
List of HBAs: HBA model, port number, WWPN, serial number (SN), HBA
number (HBA 0–n), and status (online/offline)
Total number of QLogic FC HBAs detected