Filter
Top Products
B – XML Format 2
XML2 Tags for Each Option
SN0054614-00 F B-9
A
-e (<HBA Instance> | <HBA WWPN>) (view | ?) -x2
The XML Format 2 for the boot device information is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<BootDeviceInfo>
<BootParam EnableSelectableBoot="value" />
<BootDevice TargetWWPN="value" LUNID="value"/>
</BootDeviceInfo>
</HBA>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<BootDeviceInfo>
<BootParam EnableSelectableBoot="0" />
<BootDevice TargetWWPN="value" LUNID="value"
EnableSelectableBoot="0"/>
</BootDeviceInfo>
</HBA>
<Status> n </Status>
<?ErrorMsg> "message" </ErrorMsg?>
<Reboot> n /Reboot>
</QLogic>
The <HBA> …</HBA> sequence repeats for each HBA.
NOTE:
If Enable Selectable Boot is set to 1 in the Boot Param Enable Selectable
Boot tag, it does not appear in the Boot Device Target WWPN tag:
<BootParam EnableSelectableBoot="1" />
<BootDevice TargetWWPN="value" LUNID="value"
However, if Enable Selectable Boot is set to 0 in the Boot Param Enable
Selectable Boot tag, it appears in the Boot Device Target WWPN tag:
<BootParam EnableSelectableBoot="0" />
<BootDevice TargetWWPN="value" LUNID="value"
EnableSelectableBoot="0"/>