Filter
Top Products
A – XML Format 1
XML Format 1 Tags for Each Option
A-2 SN0054614-00 F
S
A.1.3
Status Message
Before the closing main tag </QLogic>, SANsurfer FC HBA CLI displays
returning status from the execution of the command line parameters and the error
messages.
Successful execution of the command line parameters returns the following
status:
<Status> 0 </Status>
When the execution of the command line parameters fails, the status value of
non-zero is displayed, followed by an error message that provides additional
details:
<Status> 1 </Status>
<ErrorMsg> Details of the failure </ErrorMsg>
A.1.4
Reboot Message
When the execution of the command line parameters is successful and the
system must be restarted for the change to take effect, the following message is
displayed:
<Reboot> 1 </Reboot>
When the execution of the command line parameters is successful and the
system does not need to be restarted, the following message is displayed:
<Reboot> 0 </Reboot>
A.1.5
Error Message
Before the closing main tag </QLogic>, but following the Status message
SANsurfer FC HBA CLI displays error information if the status is non-zero
(indicating a failure).
<ErrorMsg> Details of the failure </ErrorMsg>
A.2
XML Format 1 Tags for Each Option
The following sections describe the XML format 1 for each command line option.
In these sections, the term number refers to the adapter number displayed with
the HBA general information (command line option -I).