Filter
Top Products
C – Interactive Exit Codes
SN0054614-00 F C-3
A
37 ERROR_FLASH_UPDATE_NO_REGION_
LAYOUT
HBA does not have flash update region lay-
out
38 Reserved Not used
39 Reserved Not used
40 ERROR_DIAGNOSTICS_PARAM_ERROR Diagnostics test returns invalid parameters
41 ERROR_DIAGNOSTICS_LOOP_DOWN Unable to run diagnostics because the loop is
down
42 ERROR_DIAGNOSTICS_FAILURE Diagnostics test failed with errors
43 ERROR_DIAGNOSTICS_DATA_ MISCOM-
PARE
Diagnostics test failed with data miscompare
44 ERROR_DIAGNOSTICS_UNKNOWN_
STATUS
Unknown diagnostics test status
45 ERROR_DIAGNOSTICS_NO_AVAIL_
TARGET
Unable to run R/W buffer test because there
are no attached devices
46 ERROR_DIAGNOSTICS_NOT_FOUND_
TARGET
Unable to run R/W buffer test because the
excluded device is not available
47 ERROR_DIAGNOSTICS_MAX_FRAME_
SETTING
Unable to run diagnostics because of the
HBA current frame size setting
48 ERROR_INVALID_DIAGNOSTICS_
SETTINGS
Invalid diagnostics test parameter settings
49 Reserved Not used
50 ERROR_FC_LINK_UNKNOWN_STATUS Error getting FC link status
51 ERROR_RESET_LINK_STATUS Unable to reset HBA link status
52 ERROR_INVALIDE_STATISTICS_PARAMS Invalid link status/statistics parameter set-
tings
53 Reserved Not used
54 Reserved Not used
55 Reserved Not used
56 Reserved Not used
57 Reserved Not used
Table C-1. Exit Code Descriptions – Interactive Mode (Continued)
Return
Code
Name Description