Q-Logic FC HBA CLI Network Card User Manual


 
5 – Non-interactive Commands
Command Summary
SN0054614-00 F 5-15
A
Where:
Table 5-4 lists the HBA statistics parameter names, aliases, and values.
Under Solaris, this feature is disabled if you are using the driver from the OS
installation CDs (QLC driver). Under Linux, this feature is disabled if you are using
the ioctl or sysfs (inbox) driver.
5.3.13
-h
(Help)
Type the following text to view the help file:
# scli (-h | ?)
Type the following text to view help information for an individual command:
# scli <Command Line Parameter> (-h | ?)
For example, typing scli -l -h shows:
SANsurfer FC HBA CLI
v1.x.x Build x
Copyright 2003-2007 QLogic Corp.
All rights reserved.
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
Parameter Name = Name of the parameter (see table 4-7)
Parameter Alias = Alias of the parameter (see table 4-7)
Parameter Value = New value of the parameter (see table 4-7)
Table 5-4. HBA Statistics Parameters
Description Name Alias Value
Sets how often statistics are
retrieved
AutoPoll AP
0–256
a
Set the polling interval when
retrieving statistics (seconds)
PollRate SR 5–30
Saves the HBA’s statistics to
a CVS log file
LogToFile LF Log file name
Table Notes
When the AutoPoll parameter is 0, statistics are retrieved automatically until the user aborts
the operation. When the AutoPoll parameter is in the range of 1–256, statistics are retrieved
for the number of cycles specified by this value.