Filter
Top Products
B – XML Format 2
XML2 Tags for Each Option
SN0054614-00 F B-3
A
scli -c 0 -x2
The XML Format 2 for adapter settings information is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<Param
ConnectionOption="value"
DataRate="value"
FrameSize="value"
HardLoopId="value"
LoopResetDelay="value"
EnableHostAdapterBIOS="value"
EnableHardLoopId="value"
FibreChannelTapeSupport="value"
OperationMode="value"
IntDelayTimer="value"
ExecutionThrottle="value"
LoginRetryCount="value"
EnableLipReset="value"
PortDownRetryCount="value"
EnableLipFulllogin="value"
LinkDownTimeout="value"
EnableTargetReset="value"
LUNsPerTarget="value" />
</HBA>
<Status> n </Status>
<Reboot> n /Reboot>
</QLogic>
The <HBA> …</HBA> sequence repeats for each HBA
Each parameter is listed on a separate line for clarity; however, multiple
parameters can be on the same line.
For multiple adapters, repeat the above sequence with the ID number
(ID Number="value") of the next adapter.
B.7.2
SFF DMI
(Command Line Option -dm)
The XML Format 2 for SFF DMI (general information) is as follows: