Q-Logic FC HBA CLI Network Card User Manual


 
4 – Interactive Commands
Utilities Menu
SN0054614-00 F 4-57
A
4.10.3
HBA Parameters Update (Per HBA Port or All HBAs)
(Command Line Option -r)
10: Utilities 3: HBA Parameters Update
When you select HBA Parameters Update, you are prompted to select either one
of your HBA port instances or All HBAs to update. SANsurfer FC HBA CLI then
displays the following warning message:
Warning:
Please update the HBA parameters with extreme care.
Incorrectly updating the HBA parameters may render the HBA inoperable.
If you currently have boot device information set up in the HBA
parameters, updating the HBA parameters from a file may result in
changing that information.
If you wish to preserve the boot device information, please either
update the file with the correct boot device settings before the
HBA parameters update or re-configure the boot settings after
the update.
Do you want to proceed with the operation?
1: Yes
2: No
Enter Selection:
If you select 1: Yes, you are prompted to enter the name of a file from which to
update the HBA parameters.
4.10.4
HBA Parameters Save (Per HBA Port)
(Command Line Option -r and Reserved Word “save”)
10: Utilities 4: HBA Parameters Save
When you select the HBA Parameters Save option, SANsurfer FC HBA CLI
prompts you to select an HBA. You then enter a file name to save the parameters
for that HBA.
4.10.5
HBA Parameters Template (Per HBA or All HBAs)
(Command Line Option -n and OEM Name)
10: Utilities 5: HBA Parameters Template