5 – Non-interactive Commands
Command Summary
SN0054614-00 F 5-9
A
Where:
5.3.5
-dm
(Display Diagnostics Monitoring Info)
This option allows you to show general or detailed Digital Diagnostic Monitoring
Interface for optical transceivers.
To show Transceiver monitoring general information, type:
# scli -dm (<HBA Instance> | <HBA WWPN> | <all>)general | gen
To show Transceiver monitoring detailed information, type:
# scli -dm (<HBA Instance> | <HBA WWPN> | all)details | det
Where:
5.3.6
-e
(Boot Device View | Select | Disable)
Use the -e command to:
Show the current boot-device selection for all HBAs (1).
Show the current boot-device selection for a specific HBA (2).
Set a target device as the boot device for an HBA (3).
Selectable boot—The OS boots from the first target the BIOS finds (4).
Delete the boot device from an HBA (5).
File Name = Absolute or full path name of the setup INF file or the com-
pressed driver file in ZIP or EXE format. The binary image of
the device driver must reside in the same absolute or full path
location. For example:
scli -d c:\temp\ql2300\qlxxx.inf
NOTES:
This option is supported only for QLA/QLE/QEM24xx (4GB) HBAs.
Under Solaris, this option is disabled if you are using Linux inbox drivers
(SLES 10.0/RHEL 5.0 or latest).
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
all = All HBAs in the system