Filter
Top Products
4 – Interactive Commands
General Information Menu (Command Line Option -g)
4-14 SN0054614-00 F
S
Port Name : 21-01-00-E0-8B-23-55-7C
Port ID : 11-06-00
Serial Number : C28437
Driver Version : SCSI Miniport 8.1.5.15 (W2K IP)
BIOS Version : 1.83
Firmware Version : 2.02.03
Actual Connection Mode : Point to Point
Actual Data Rate : 1 Gbps
PortType (Topology) : NPort
Target Count : 2
PCI Bus Number : 1
PCI Device Number : 5
HBA Status : Online
------------------------------------------------------------------------------
HBA VPD Information
------------------------------------------------------------------------------
Feature is not supported with selected HBA (Instance 1 - 2200)!
------------------------------------------------------------------------------
HBA Parameters Settings
------------------------------------------------------------------------------
------------------------------------------------------------------------------
HBA Instance 1: 2200 Port 2 WWPN 21-01-00-E0-8B-23-55-7C PortID 11-06-00
------------------------------------------------------------------------------
Connection Options : 3 - Point-to-Point, Otherwise Loop
Frame Size : 1024
Hard Loop ID : 0
Loop Reset Delay (seconds) : 5
Enable Host HBA BIOS : Disabled
Enable Hard Loop ID : Disabled
Enable FC Tape Support : Enabled
Execution Throttle : 16
Login Retry Count : 8
Enable LIP Reset : Disabled
Port Down Retry Count : 30
Enable LIP Full Login : Enabled
Link Down Timeout (seconds) : 0
Enable Target Reset : Enabled
LUNs Per Target : 8
------------------------------------------------------------------------------
Driver Settings Information
------------------------------------------------------------------------------
------------------------------------------------------------------------------
HBA Instance 1: 2200 Port 2 WWPN 21-01-00-E0-8B-23-55-7C PortID 11-06-00
------------------------------------------------------------------------------
-----------------------------------
Driver Settings - Group: Persistent
-----------------------------------
Present targets that are persistently bound plus any new target(s) : Enable