Filter
Top Products
4 – Interactive Commands
Target Link Speed or iiDMA Settings Menu (Command Line Option -q)
4-38 SN0054614-00 F
S
LUN : 0
Size : 68.37 GB
Type : SBC-2 Direct access block device
(e.g., magnetic disk)
WWULN : 20-00-00-00-87-72-85-B2
OS LUN Name : /dev/sda
Here is an example of the All LUNs information on Solaris with a QLA driver:
Product Vendor : SUN
Product ID : StorEdge 3510
Product Revision : 415F
LUN : 15
Size : 4.88 GB
Type : SBC-2 Direct access block device
(e.g., magnetic disk)
WWULN : 60-0C-0F-F0-00-00-00-00-09-8B-68-37-E0-B1-
9B-04
OS LUN Name : /dev/rdsk/c1t0d0s15
4.5
Target Link Speed or iiDMA Settings Menu
(Command Line Option -q)
5: Target Link Speed or 5: iiDMA Settings
This option shows the Target Link Speed Menu or iiDMA Menu that includes a
list of all HBAs and port instances detected, including the options to select:
Each HBA port instance, individually
All HBAs
Here is an example of the Target Link Speed Menu or iiDMA Settings Menu:
HBA Model QLA2342:
1. Port 1 WWPN 21-00-00-EO-8B-01-43-9B Online
2. Port 2 WWPN 21-01-00-E0-8B-21-43-9B Online
HBA Model QLA2300:
3. Port 1 WWPN 21-00-00-E0-8B-05-CB-D8 Loop down
4. Port 2 WWPN 21-01-00-E0-8B-25-CB-D8 Online
HBA Model QLA2462:
5. Port 1 WWPN 21-00-00-E0-8B-1P-9D-P0 Online
6. Port 2 WWPN 21-01-00-E0-8B-3P-9D-P0 Loop down
HBA Model QLA21O:
7. Port 1 WiIPN 21-00-00-E0-8B-1A-3F-E0 Online
NOTE:
Depending on your system, the SANsurfer FC HBA CLI Main Menu may
show either the Target Link Speed option or the iiDMA Settings option.