Filter
Top Products
Page viii SN0054614-00 F
S
SANsurfer FC HBA CLI User’s Guide
Command Line Interface for QLogic Fibre Channel Host Bus Adapters
The following options and commands were changed in Rev. D:
Interactive mode commands
: Changed instructions
and the example text to new port sorting and num-
bering scheme. No change to command function.
Non-interactive mode commands:
Changed the
HBA Port No. parameter to HBA No. parameter
to support new port sorting and numbering
scheme. No change to command function.
Display HBA Settings (-c)
DisplayHBA Information (-i)
Display Device List (-t)
Display LUN List (-l)
Configure HBA Settings (-n)
Target Persistent Binding (-p)
Selective LUNs (-m)
Boot Device Selection (-e)
Driver Settings (-fs)
View Driver Settings (-fg)
Save/Update Flash (-b)
Save/Update NVRAM (-r)
Flash HBA Beacon (-a and -tb)
Diagnostics (-kl and -kr)
Statistics (-gs and -ls)
4.3, 5.3.3
4.4, 5.3.1
5 4.5, 5
4.6, 5
4.7, 5
4.8, 5
4.9, 5
4.10, 5
4.11, 5
4.12, 5
4.12, 5
4.11, 5
4.16, 5
4.17, 5
4.18, 5
Host Information (-g):
Quantified that the direct driver version is only
displayed in Windows. No longer shows firm-
ware version. Shows new HBA number (HBA 0–n)
4.2.1, 4.2.4
Display HBA Information (-I).
The following new general information shows:
HBA instance, HBA ID, OptionROM BIOS version,
OptionROM FCode version, OptionROM EFI ver-
sion, OptionROM firmware version, total number of
devices.
The following general information has been
removed: Device target count
The following VPD information has been removed:
Asset tag End tag
4.4, 5.4.8