Filter
Top Products
4 – Interactive Commands
Driver Settings Menu (Command Line Option -fg)
4-54 SN0054614-00 F
S
4.8.1.2.3
Save Configuration
8: Boot Device n: Port Number 2: Config.Boot Device 2: Device Settings 1: LUN List 1: Save Configuration
When you select this option, the CLI shows the Save Configuration menu:
Proceed
Cancel
4.8.2
Boot Device(s) (All HBAs)
8: Boot Device 1: All HBAs
When you select this option, SANsurfer FC HBA CLI shows information about all
boot devices for all HBAs. For details, see “Boot Device(s) (Per HBA Port)” on
page 4-52.
Product vendor
Product ID
Product revision
4.9
Driver Settings Menu
(Command Line Option -fg)
9: Driver Settings
When you select this option, SANsurfer FC HBA CLI shows the Driver Settings
Menu that lists the ports on each HBA. Select the number corresponding to the
port that you want, and then press ENTER to view the Target: Display Options
and Target: Binding Options.