B – XML Format 2
Display System Information (Command Line Option -g)
B-14 SN0054614-00 F
S
scli -kr (<HBA Instance> | <HBA WWPN>) [(-EX | -EXCLUDE)
<Target WWPN>] (<Parameter Name> | <Parameter Alias>)
<Parameter Value> -x2
The XML Format 2 for the read/write buffer test results is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<Target>
<WWNN> Target WWNN </WWNN>
<WWPN> Target WWPN </WWPN>
<Loop ID ="value" DataMiscompare="value" LinkFailure=
"value" LossOfSync="value" LossOfSignal="value" InvalidCRC="value"
Result="value" />
</Target>
</HBA>
<Status> n </Status>
<Reboot> n /Reboot>
</QLogic>
The <Target>... </Target> sequence repeats for each target.
B.8.4
Display LUN List
(Command Line Option -l)
The command format is:
scli -l <HBA Instance> | <HBA WWPN> -x2
The XML Format 2 for the adapter LUN list information is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<Target>
<WWNN>value</WWNN>
<WWPN>value</WWPN>
<LUN ID="value"
WWULN="value"