Filter
Top Products
4 – Interactive Commands
HBA Parameters Menu
4-22 SN0054614-00 F
S
All HBAs
Here is an example of an HBA Information Menu screen. In this example, the
host includes three HBAs with two ports each and one HBA with a single port:
HBA Model QLA2342:
1. Port 1 WWPN 21-00-00-EO-8B-01-43-9B Online
2. Port 2 WWPN 21-01-00-E0-8B-21-43-9B Online
HBA Model QLA2300:
3. Port 1 WWPN 21-00-00-E0-8B-05-CB-D8 Loop down
4. Port 2 WWPN 21-01-00-E0-8B-25-CB-D8 Online
HBA Model QLA2462:
5. Port 1 WWPN 21-00-00-E0-8B-1P-9D-P0 Online
6. Port 2 WWPN 21-01-00-E0-8B-3P-9D-P0 Loop down
HBA Model QLA21O:
7. Port 1 WiIPN 21-00-00-E0-8B-1A-3F-E0 Online
8. All HBAs
9. Return to Previous Menu
Enter the number to select the HBA you want to configure or All HBAs.
4.3.1
HBA Parameters (Per HBA Port)
3: HBA Parameters n: Port Instance
The HBA Instance menu has the following options:
Display HBA Parameters
Configure HBA Parameters
Restore Defaults (4Gb and 8Gb HBAs only)
Return to Previous Menu
4.3.1.1
Display HBA Parameters
(Command Line Option -c#)
3: HBA Parameters n: Port Instance 1: Display HBA Parameters
When you select this option, the following parameters appear:
Connection Options
Data Rate (QLA23xx, QLA24xx, QLE23xx, and QLE24xx HBAs)
Frame Size
Hard Loop ID
Loop Reset Delay (seconds)
Enable Host HBA BIOS
Enable Hard Loop ID
Enable FC Tape Support
Operation Mode
Interrupt Delay Timer (100 ms)