Q-Logic FC HBA CLI Network Card User Manual


 
A – XML Format 1
XML Format 1 Tags for Each Option
A-10 SN0054614-00 F
S
</QLogic>
The <Target> sequence is repeated for each device attached to the adapter.
A.2.11
View Driver Settings
(Command Line Option -fg)
The XML Format 1 for the current driver settings information is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
<HBA>
<HBA Port="value" WWNN="value" WWPN="value" />
<DriverSettings>
<Info PersistentPlusNew="value"
PersistentOnly="value"
BindbyWWPN="value"
BindbyPortID="value" />
/DriverSettings>
</HBA>
<Status> 0 </Status>
<Reboot> 0 </Reboot>
</QLogic>
A.2.12
Display All Information for One or All HBAs
(Command Line Option -z)
The XML Format 1 for all adapter information is more complicated than its
non-XML counterpart because the tags cannot be repeated. In non-XML mode,
SANsurfer FC HBA CLI sequentially calls all the options in Table A-1, and each
option is displayed in its standard output format. If each option displays its own
XML output, the resulting display would have multiple duplicate tags.
Table A-1. Options Displayed by -z
Non-interactive
Option
Description Section
-g Display system information 4.1
-I Display HBA information 4.2
-c Display HBA settings 4.3
-t Display device list 4.4
-L Display LUN list 4.4