SN0054614-00 F PRELIMINARY 1-1
Section 1
Introduction
1.1
Product Overview
The SANsurfer
®
FC HBA CLI tool provides a command line interface (CLI) that
lets you easily install, configure, and deploy QLogic
®
Fibre Channel (FC) host bus
adapters (HBAs). It also provides robust diagnostic and troubleshooting
capabilities and useful statistical information to optimize SAN performance. This
tool only configures HBAs on the local machine (where SANsurfer FC HBA CLI is
installed.)
SANsurfer FC HBA CLI is a simplified, condensed version of the SANsurfer FC
HBA Manager graphical user interface (GUI).
SANsurfer FC HBA CLI can be operated in two modes:
Interactive mode (menu-driven interface). This mode requires user
intervention.
Non-interactive mode (command line interface). Use this mode for
scripting or when you want to do a single operation.
1.2
Guide Overview
This guide is intended for end users responsible for administration of QLogic FC
HBAs.
1.2.1
How this Guide is Organized
The SANsurfer FC HBA CLI User’s Guide is organized into the following sections
and appendices:
Section 1 Introduction: This section provides a general overview of the product,
lists the supported QLogic HBAs and operating systems, lists the system
hardware and software requirements, and provides contact information for
technical support.
NOTE:
This guide uses interchangeably the terms HBA and adapter.