Q-Logic FC HBA CLI Network Card User Manual


 
5 – Non-interactive Commands
Command Summary
SN0054614-00 F 5-17
A
5.3.15
-i
(Display HBA General Information or VPD Information for One or All HBAs)
To show general HBA information or VPD information for all HBA ports in the
system, type the following command:
# scli -i [ <all> ] [ <VPD> ]
Where:
To show general or VPD information for a specific HBA, type:
# scli -I (<HBA Instance> | <HBA WWPN>) [ VPD ]
To show VPD (QLA/QLE24xx only) for all HBA ports in the system, type:
# scli -i VPD
# scli -i all VPD
Where:
5.3.16
-kl
(Loopback Test)
Use the -kl command to perform the loopback test.
Use the -kr command to perform the read/write buffer test (see section 5.3.18.1).
To do a loopback test with the default parameters, type:
# scli -kl (<HBA Instance> | <HBA WWPN>)
To do a loopback test with customized parameters, type:
# scli -kl (<HBA Instance> | <HBA WWPN>) [(<Parameter Name> |
<Parameter Alias>) <Parameter Value>]
Where:
all = All HBAs in the system
VPD = Vital Product Data
all = VPD information for all HBAs in the system
HBA Instance = HBA number (use -g command to find)
HBA WWPN = World wide port name of the HBA
-ex or -exclude Target
WWPN
= World wide port name of the target device to be
excluded from the read/write test