Q-Logic FC HBA CLI Network Card User Manual


 
4 – Interactive Commands
Diagnostics Menu (Command Line Options -kl, -kr, and -dm)
SN0054614-00 F 4-75
A
Tx_I(Offset): 0x0000
Tx_PWR(Slope): 0x0000
Tx_PWR(Offset): 0x0000
T(Slope): 0x0000
T(Offset): 0x0000
V(Slope): 0x0000
V(Offset): 0x0000
Checksum: 0x63
Temperature MSB: 0x22
Temperature LSB: 0x2c
Vcc MSB: 0x82
Vcc LSB: 0x21
TX Bias MSB: 0x0b
TX Bias LSB: 0x76
TX Power MSB: 0x13
TX Power LSB: 0x77
RX Power MSB: 0x0b
RX Power LSB: 0x7b
Reserved MSB: 0x00
Reserved LSB: 0x00
Reserved MSB: 0x00
Reserved LSB: 0x00
Status/Control Bits:-Data_Ready_Bar: 0x0
-LOS: 0x0
-TX Fault: 0x0
-Soft RX Rate Select: 0x0
-RX Rate Select State: 0x0
-Soft TX Disable: 0x0
-TX Disable State: 0x0
-TX Signal Power Low Alarm: 0x0
-TX Signal Power High Alarm: 0x0
-TX Bias Low Alarm: 0x0
-TX Bias High Alarm: 0x0
-Vcc Low Alarm: 0x0
-Vcc High Alarm: 0x0
-Temp Low Alarm: 0x0
-Temp High Alarm: 0x0
-RX Signal Power Low Alarm: 0x0
-RX Signal Power High Alarm: 0x0
-TX Signal Power Low Warning: 0x0
-TX Signal Power High Warning: 0x0
-TX Bias Low Warning: 0x0
-TX Bias High Warning: 0x0
-Vcc Low Warning: 0x0
-Vcc High Warning: 0x0
-Temp Low Warning: 0x0
-Temp High Warning: 0x0
-Reserved Warning: 0x0
-Reserved Warning: 0x0