Filter
Top Products
4 – Interactive Commands
HBA Parameters Menu
4-28 SN0054614-00 F
S
This choice gives you the option to set the Port Down Retry Count to a value from
0 to 255.
4.3.1.2.15
Enable LIP Full Login
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Enable LIP Full Login
This choice gives you the option to enable or disable LIP Full Login.
4.3.1.2.16
Link Down Timeout
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Link Down Timeout
This choice gives you the option to set the Link Down timeout to a value from 0 to
240.
4.3.1.2.17
Enable Target Reset
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Enable Target Reset
This choice gives you the option to Enable or Disable Target Reset.
4.3.1.2.18
LUNs per Target
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. LUNs per Target
This option shows the LUNs per Target menu. From it you can select:
0 LUN per Target
8 LUNs per Target
16 LUNs per Target
32 LUNs per Target
64 LUNs per Target
128 LUNs per Target
256 LUNs per Target
4.3.1.2.19
Commit Changes
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Commit changes
Choose this option to make the changes permanent.
CAUTION!
There is undo after you commit to making changes to the HBA parameters.