Q-Logic FC HBA CLI Network Card User Manual


 
E – Help Commands
SN0054614-00 F E-3
A
–e ( <hba instance> | <hba wwpn> )
( view | ? )
Shows the current boot device information on
an HBA port.
–e ( <hba instance> | <hba wwpn> )
( view | ? )
Shows the current boot device information on
an HBA port.
–e ( <hba instance> | <hba wwpn> )
disable [ prim | alt1 | alt2 |
alt3 ]
Clears the selected current boot device set-
tings on an HBA port (prim/alt1/alt2 or
alt3 Boot Port Name). Configures all LUNs of
all devices attached to an HBA port (Disable).
–e ( <hba instance> | <hba wwpn> )
disable [ prim | alt1 | alt2 |
alt3 ]
Clears the selected current boot device set-
tings on an HBA port (prim/alt1/alt2 or
alt3 Boot Port Name).
–e ( <hba instance> | <hba wwpn>
<target wwnn> <target wwpn>
<lun id> [ prim | alt1 | alt2 |
alt3]
Configures the operating system to boot from
a specific target:
prim: Primary Boot Port Name
alt1: Alternate 1 Boot Port Name
alt2: Alternate 2 Boot Port Name
alt3: Alternate 3 Boot Port Name
–e ( <hba instance> | <hba wwpn>
<target wwnn> <target wwpn>
<lun id> [ prim | alt1 | alt2 |
alt3]
Configures the operating system to boot from
a specific target:
prim: Primary Boot Port Name
alt1: Alternate 1 Boot Port Name
alt2: Alternate 2 Boot Port Name
alt3: Alternate 3 Boot Port Name
–e ( view | ? ) Shows the current boot device information on
all HBAs.
–e ( view | ? ) Shows the current boot device information on
all HBAs.
–ei Lists the exit codes.
–f <file name> Executes from a command input file. Option
–f cannot be combined with any other options.
–fg ( <hba instance> | <hba wwpn> )
( view | ? )
Shows the current driver settings.
Table E-1. Help Commands (Continued)
Command
Line
Action
Arguments Function