Filter
Top Products
4 – Interactive Commands
HBA Parameters Menu
SN0054614-00 F 4-25
A
4.3.1.2.1
Connection Options
3: HBA Parameters 1: Port Number 2: Configure HBA Parameters n. Connection Options
From this menu, you can configure the connection options:
0–Loop Only
1–Point to Point Only
2–Loop Preferred, Otherwise Point-to-Point
3–Point-to-Point, Otherwise Loop (QLA22xx HBA only)
Type the number for the connection type you want and press ENTER.
4.3.1.2.2
Data Rate
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Data Rate
This option shows the Data Rate menu. (Note that data rate configuration is not
available for all HBA port instances.) From this menu you can select:
Auto
1 Gbps
2 Gbps
4 Gbps
8 Gbps
Type the number for the data rate you want and press ENTER.
4.3.1.2.3
Frame Size
3: HBA Parameters N: Port Number 2: Configure HBA Parameters n. Frame Size
This option shows the Frame Size menu. From it you can select:
3. Others:
0 = Disable
1 = Enable
4. Option is not available on 4Gb or latest HBAs.
5. Option is available on 4Gb or latest HBAs.
6. Operation Modes:
0 = Interrupt for every I/O completion
5 = Interrupt when Interrupt Delay Timer expires.
6 = Interrupt when Interrupt Delay Timer expires or no active I/O.
NOTE:
The 1 Gbps data rate is not supported with 8G HBAs.